Though commercial doors are made to bear the high amount of rough usage, one just cannot avoid the problems sometimes. These doors are made from high quality, heavy duty, and strong materials. Due to this, major problems cannot be repaired all the time, but there are some small things that you can do in order to keep things working smoothly until you really need professional for commercial door repair. In a place like the sunshine coast, you can search for commercial door repair sunshine coast. Here are a few problems that you may experience with your doors and how may handle them.
The first problem that one might face most likely is with the door handle, as they are the most abused parts. Replacing these handles is not difficult, but since it is a commercial door, you may need special tools and sufficient time to get it fixed. While doing such repairs or replacements on your own door, you should remember to follow safety standard regulations. So make sure to check the facts before doing anything.
In order to remove minor pull and push handles, just take out the screws in every corner of the door it is attached with. Once it is removed, you can pull the handle from the door. Then you can slide the cover from the doorknob to see the screws. Normally the cover plate snaps into the proper place. So if you have a difficulty in taking it off, then you need to twist it around until it comes out. Once the screws are seen, remove the one which is holding the knob. Once you have taken these off, you have to take every side of the knob carefully and slowly pull them apart.